Configure WDS Bridging with a TP-Link Router

NC

This article explains How to configure WDS Bridging on the TP-LINK TL-WR741ND, TL-WR740N router. Its management IP is 192.168.1.1 or 192.168.0.1.

Step 1 : Log in TP-LINK TL-WR741ND wireless router

Open a web-browser (such as Microsoft Internet Explorer, Google Chrome, Mozilla Firefox or Apple Safari). Enter the ip address of TP-LINK TL-WR741ND wireless router: 192.168.1.1 or 192.168.0.1.

How to configure WDS Bridging with a TP-Link Router

Username : admin

Password : admin

Step 2 : WDS Bridging Setting on TP-LINK TL-WR741ND, TL-WR740N router

Click : Wireless -> Wireless Setting -> Enable WDS Bridging

How to configure WDS Bridging with a TP-Link Router

Then, click "Survey" button to choose an AP. 

How to configure WDS Bridging with a TP-Link Router

  • Note : The informations of APs which you could connect to are shown on this page. Use as follow :

  • First, find the line where the network you want to connect lay on.

  • Then, click the hyperlink "Connect" at the end of that line.

  • Now, the target network's SSID is filled in the correct place on the Wlan config page automatically.

How to configure WDS Bridging with a TP-Link Router

Note : Click the Rrefresh button to update the AP list.

After choosing the AP, the SSID and BSSID will be filled.

  • Channel : 11

  • Key type : WPA-PSK/WPA2-PSK

  • Password : Enter the password of the AP you selected correctly.

How to configure WDS Bridging with a TP-Link Router

Click the "Save" button to save your settings, then click "click here" to reboot your TP-Link Router.

How to configure WDS Bridging with a TP-Link Router


Tags: 192.168.0.1 192.168.1.1 TL-WR741ND WDS Bridging TP-LINK