192.168.1.1 | Configure Draytek Vigor 2960/300B/3900

NC

This article explains How to Configure Draytek Vigor 2960/300B/3900 wireless router. Its management IP is 192.168.1.1.

Log in Draytek Vigor 2960/300B/3900 wireless router

Open a web-browser (such as Microsoft Internet Explorer, Google Chrome, Mozilla Firefox or Apple Safari). Enter the ip address of Draytek Vigor 2960 wireless router: 192.168.1.1.

Username : admin

Password : admin

PPPoE Configration On Draytek Vigor 2960

Go to "WAN" > "General Setup" > "Add", Check "Enable", Select "PPPoE" in IPv4 Protocol, then click "PPPoE".

192.168.1.1 | Configure Draytek Vigor 2960/300B/3900

Enter Username and password provided by your ISP. Check "Enable" on "Always On", then click "Apply" to save your settings.

192.168.1.1 | Configure Draytek Vigor 2960/300B/3900

Static IP Configration On Draytek Vigor 2960

Go to "WAN" > "General Setup" > "Add", Check "Enable", Select "Static" in IPv4 Protocol, then click "Static".

192.168.1.1 | Configure Draytek Vigor 2960/300B/3900

Enter your IP Address provided by your ISP (For example : 172.16.17.10), Subnet Mask : 255.255.255.0/24, Gateway IP address : "172.16.17.1". Add a DNS Server IP Address : 8.8.8.8 or 8.8.4.4.

Click "Save" button, then click "Apply" button to save you settings.

192.168.1.1 | Configure Draytek Vigor 2960/300B/3900

NAT Configuration

Go to "NAT" > "Port Redirection" > "Add". Profile : FTP, check "Enable", Public Port : 21, Private IP : your FTP Server IP Address (For example : 192.168.1.100), Private Port : 21. Then, click "Apply" button to save your settings.

192.168.1.1 | Configure Draytek Vigor 2960/300B/3900

Setting Password

Go to "System Maintenance" > "Administrator Password".

Note : Passwords can be up to 100 characters in length (Suggest less than 32 characters, Include lowercase and uppercase alphabetic characters, numbers).

192.168.1.1 | Configure Draytek Vigor 2960/300B/3900

Tags: Vigor 2960 192.168.1.1 Draytek